Embedded Master™ implements Microsoft's .NET Micro Framework (2.5 and 3.0) This allows users to run C# managed code right inside Embedded Master. Users will use Visual Studio to develop and debug programs.
Not only that, Embedded Master is the first and only OEM device that implements .NET Micro Framework and adds FAT file system and USB host capabilities. Users can access files on SD cards or USB memory devices (thumb drive, USB hard drive...etc.) and also use many other USB devices such as, mice, keyboards, joystick, printers, bluetooth dongles and many more.
The module includes a 0.5mm 40 pin connector for LQ043T1DG01 TFT display from Sharp. This color TFT LCD is 480x272 and compatible with LCDs used in PSP from Sony.
Using other TFT or SPI LCDs is possible as well. See manual for more details
Windows SideShow is also fully supported.
Visit Microsoft's .NET Micro Framework website for more details.
Not only that, Embedded Master is the first and only OEM device that implements .NET Micro Framework and adds FAT file system and USB host capabilities. Users can access files on SD cards or USB memory devices (thumb drive, USB hard drive...etc.) and also use many other USB devices such as, mice, keyboards, joystick, printers, bluetooth dongles and many more.
The module includes a 0.5mm 40 pin connector for LQ043T1DG01 TFT display from Sharp. This color TFT LCD is 480x272 and compatible with LCDs used in PSP from Sony.
Using other TFT or SPI LCDs is possible as well. See manual for more details
Windows SideShow is also fully supported.
Visit Microsoft's .NET Micro Framework website for more details.
OEM Board with Microsoft's .NET Micro Framework, USB Host, FAT File System and TFT display support.
The world smallest and lowest cost .NET Micro Framework Development System
The most advanced .NET Micro Framework device on the market with many exclusive features, including USB host, Database and native procedures support.
-
Software:
- .Net Micro Framework 3.0
- Windows SideShow
- LCD Support (TFT, VGA, SPI)
- Touch Screen Support
- Changing LCD, Debug Interface Support
- FAT File System
- Full TCP/IP Stack
- SSL
- PPP Stack
- USB Host Support (Thumb Drives, Hard Disk, Mouse, Keyboard, Printer ...etc)
- Piezo
- Register Access
- Many Other Native Functions
-
Hardware:
- 72Mhz ARM7 Processor
- 8MB SDRAM
- 4.5MB FLASH
- LCD Controller
- 10/100 Ethernet Interface
- USB Host
- USB Device
- 51 GPIO Pins + 20 on LCD Connector (45 on Non-TFT)
- 31 Interrupt Inputs + 10 on LCD connector (30 on Non-TFT)
- 2 SPI (8/16 bit)
- I2C
- 4 UART
- 2 CAN Channels
- 7 10-bit Analog Inputs
- 10-bit Analog Output
- 4-bit SD Memory Interface
- 5 PWM
- 160mA with Everything Enabled
- 40mA Hibernate Mode
- -40 to +85 Operational
- Lead Free
- Connector-less Mounting
- Easy Prototyping with even Hand Soldering
